By Halcyon Machinery · Factory-direct from our Xiamen production base · Published
Direct answer
When you look at metal roofing machines for sale, start from the roof sheet you sell, not from the machine listing. Each roll forming machine is tooled for one profile drawing: trapezoidal, corrugated, standing seam, step tile or ridge cap. Choose the machine type from the profile, set the line level (single profile, double layer or automatic stacking), then insist on a trial with your drawing and coil before shipment. Send a drawing or a measured sample photo and we reply with a written quotation within 24 hours.
Price ranges
| Trapezoidal roof sheet machines | US$20,000–29,000 (standard) · US$33,000–59,000 (premium), FOB China |
| Corrugated sheet machines | US$20,000–29,000 (standard) · US$31,000–49,000 (premium), FOB China |
| Double-layer roof sheet machines | US$23,000–34,000 (standard) · US$36,000–59,000 (premium), FOB China |
| Standing seam machines | US$23,000–36,000 (standard) · US$45,000–75,000 (premium), FOB China |
| Glazed tile (step tile) machines | US$21,000–31,000 (standard) · US$34,000–55,000 (premium), FOB China |
Standard covers the first two configuration levels (single-profile and multi-profile / quick-change); premium covers fully automatic lines.
Final price depends on profile, thickness, speed, punching and automation. Excludes freight, import duties and installation. Send your profile drawing for a quotation within 24 hours. North American configurations (480V/60Hz, UL and local requirements) are quoted separately.
Large complete lines (e.g. truck chassis beam lines or full cable tray lines) are quoted per project, typically above US$150,000.
Manufactured in our Xiamen factory · 35+ years of roll forming experience.
Get a quote for this machine
Send your profile drawing or a photo of the profile. We reply within 24 hours with a configuration and price.
Commercial terms
- Lead time
- standard machines 30–60 days; automatic and heavy-duty lines 60–120 days (confirmed in the quotation).
- Warranty
- 12 months on the machine, lifetime technical support by video and remote guidance; wear parts excluded.
- Payment
- 30% deposit; 70% before shipment, after you approve the trial-run video.
- Shipping
- FOB Xiamen, China.
Step 1: match the machine to the roof sheet you sell
| Roof sheet you sell | Machine to look for | Check before buying |
|---|---|---|
| Trapezoidal / box-rib sheet (IBR type) | Trapezoidal roof roll forming machine | Rib height, pitch and effective cover width |
| Corrugated sheet | Corrugated sheet roll forming machine | Wave pitch, depth and side lap |
| Standing seam panels | Standing seam roll forming machine | Seam type (snap-lock or mechanical) and panel widths |
| Step tile / glazed tile sheet | Glazed tile roll forming machine | Step pitch, step pressing and end allowance |
| Two profiles in similar volumes | Double layer roll forming machine | Both drawings; only one layer runs at a time |
| Ridge caps and flashings | Ridge cap roll forming machine | Ridge angle and fit with the main sheet |
Not sure which family your sheet belongs to? Compare corrugated vs trapezoidal tooling and single vs double layer machines, or start from the roof sheet roll forming machine overview.
Step 2: buy it in seven checks
| Step | What to do | What you should receive |
|---|---|---|
| 1. Fix the drawing | Measure your best-selling sheet: rib or wave height, pitch, cover width, edges | A dimensioned drawing both sides sign |
| 2. Specify the coil | Steel grade, coating or paint, thickness range (BMT or TCT), coil width | Material basis written in the offer |
| 3. Choose the line level | Single profile, double layer, or automatic cut and stacking | A clear list of included stations |
| 4. Compare itemized quotations | Decoiler, forming stands, cutter, run-out, controls, spares, FOB or CIF | Itemized quotation on the same basis |
| 5. Trial before shipping | Run your drawing with coil of the stated thickness | Trial video and measured sample sheets |
| 6. Packing and loading | Check container loading, rust protection and the parts list | Packing list and loading photos |
| 7. Installation and start-up | Agree video commissioning or an engineer visit, and the spare parts | Manual, electrical drawings, spares list |
Get a roofing machine quotation in 24 hours
Send your roof sheet drawing (or a photo of a sample with measurements), thickness range and target output. Our factory engineers in Xiamen reply with a written, itemized quotation within 24 hours.
New factory-direct line or a used machine for sale?
| Question | New line, factory-direct | Used machine for sale |
|---|---|---|
| Profile | Rolls cut to your drawing | Only the profile it was built for |
| Condition | New rolls, shafts and electrics | Wear and repairs unknown |
| Proof | Trial with your coil, video and samples | Ask to see it running and measure a sheet |
| Voltage and controls | Built for your voltage and frequency | May need rewiring or a transformer |
| Documents | Manual, electrical drawings, parts list | Often incomplete |
A used machine can work if the profile is exactly the one your market buys. Otherwise the cost of new rolls usually closes the price gap.
What changes the price
Profile tooling, thickness range, single or double layer, cut-off type and sheet length, automation and stacking, control and hydraulic brands, and the delivery scope (FOB or CIF, installation, spares). We do not publish price lists because quotations differ by configuration and market. For a worked breakdown see corrugated roof sheet machine price.
Watch: what a double layer roof sheet machine is
A short Halcyon video on when one machine with two forming layers makes sense.
Questions buyers ask
Which metal roofing machine should I buy first?
Buy the machine for the roof sheet you already sell most. In many markets that is one trapezoidal or corrugated profile; a double-layer machine makes sense when two profiles sell in similar volumes. Send a photo or drawing of the sheet and we tell you which line fits.
Is a new factory-direct machine better than a used roofing machine for sale?
A used machine only makes the profile its rolls were cut for, and its wear and electrics are unknown. A new line is tooled to your drawing, trialled with your coil and shipped with a parts list and manuals. If you consider a used machine, ask for a video of it running and measure a sample sheet against your drawing.
How much does a metal roofing machine cost?
We quote by configuration, not from a price list. The profile, thickness range, single or double layer, cutting method, automation, control brands and FOB or CIF terms change the price. Send your drawing and we reply with a written quotation within 24 hours.
Can I see the machine working before it ships?
Yes. Ask for a trial with your profile drawing and a coil of the stated thickness, with a video and measured sample sheets. Approve the trial before final payment and packing.
What do I need to send for a quotation?
A dimensioned drawing or a photo of a sample sheet with measurements, steel grade and coating, thickness range, coil width, sheet lengths, target output, voltage and destination port.
What to send for a quotation
Roof sheet drawing or measured sample photo, steel grade and coating, thickness range, coil width, sheet-length schedule, target output, voltage and destination port. See reference projects from our Xiamen production base.
Quotation within 24 hours
Factory-direct from our Xiamen production base. Send your drawing by form or WhatsApp.
Related guides
roof sheet roll forming machine · corrugated roof sheet machine price · cover width and side-lap trial · factory vs portable roof panel roll former · quotation checklist
Sources: Halcyon roof sheet product pages and buyer guides; our Xiamen production base's published machine photographs; Xiamen workshop photograph; reviewed 8 October 2026.