Map each size to its die
Place the approved CC/CU drawings into the three quoted bands. Flag widths and hole layouts between bands for a written custom-tool review.
Light Steel Keel & Drywall Machines
HSK-2000 Light Steel Framing Machine
CC/CU framing-profile production with a documented 75–200 mm overall web range; confirm the separate punch-die bands against each approved drawing. The final tooling, layout and guaranteed output are confirmed after we review your profile drawing and production target.
For the general light steel framing machine selection, compare member drawings, tool coverage and the production schedule before choosing this model. A CC/CU section label does not prove structural suitability or compatibility with every drywall or ceiling profile. For a drywall stud-and-track order, use the stud and track drawing review.
Drawing basedprofile and tooling
HSK-2000model family
PLC controlledproduction recipes
Reference configuration. Final machine follows the signed technical agreement.
HSK-2000 width planning
Plan changeovers around the three quoted die bands
The factory technical standard describes a 75–200 mm overall web range but separately lists standard punch-die bands of 75–96, 138–159 and 180–200 mm. A web width inside the overall range does not by itself prove the standard dies cover its holes.
Test both changeover directions
Run from a smaller to a larger section and back. Record software input, powered adjustments, any tool change and first acceptable parts.
Verify punches by member
Check service holes, connection holes, notches and cut features against each drawing; the same nominal web width may use different details.
Use completed parts as output
Time a representative order with its actual punches, lengths and changeovers. Do not use the published high-speed figure as guaranteed shift output.
Verified profile and material range
HSK-2000 documented configuration
A flexible platform for three principal CFS width bands within a 75-200 mm total web range.
- Web range
- 75-200 mm total documented range
- Material thickness
- 0.75-1.6 mm
- Suitable material
- Q235, Q345 and G550 galvanized steel, subject to profile review
- Documented high speed
- 35 m/min
- Main drive
- 14 kW servo
- Reference machine weight
- About 10 t
- Reference forming section
- 8.5 x 1.55 x 1.95 m
- Production input
- CSV reference workflow
- Final guaranteed values
- Issued after drawing, material and production-cycle review
Speed note: punching, marking, cutting and part handling determine finished-member output.
Production process
The complete production sequence
The proposal defines every station, interface, production assumption and acceptance checkpoint.
Coil loading
Data import
Punching and marking
Precision forming
Cutting
Part sorting / assembly
Equipment details & factory reference
Review the proposed configuration before production
We provide the current machine layout, component list, sample profile and test plan for the exact quotation.
HSK-2000 Light Steel Framing MachineReference image; request current factory photos and a test video for the offered build.
Reference configurationFactory trial plan
Prove the HSK-2000 changeover and punching package
Source: the factory's HSK-2000 technical standard supplied to Halcyon; review updated 27 September 2026. The offered revision and final tool list must be confirmed in writing.
Size recipe
Record the target web, flange and lip dimensions and the saved settings for each approved member.
Standard versus custom dies
List the three standard die bands and price any required out-of-band size as a separate confirmed scope.
Connection operations
Specify head and tail cuts, web or flange holes, service openings and any swage or notch by drawing revision.
Changeover evidence
Keep the setup log and measured first-off pieces for both directions of the size change.
Handling and sorting
Confirm run-out length, marking and part identification against the proposed production schedule.
Acceptance record
Agree coil, sample count, dimensions, hole datum, tolerances and a complete-line timed run before production.
Applications and related models
Choose the model after the profile review
CC/CU framing-profile production with a documented 75–200 mm overall web range; confirm the separate punch-die bands against each approved drawing.
HSK-2000 buyer questions
Do the width range and die scope match?
Does 75–200 mm mean every width uses the standard punch dies?
No. The supplied standard lists three included die bands. Ask for a written tool review and quotation for any width or hole layout outside them.
What proves automatic width changeover?
A witnessed two-direction trial showing inputs, powered and manual steps, elapsed time and measured first-off parts. A catalogue automation label is not enough.
What should I send for a comparable offer?
Send every CC/CU drawing, steel grade, thickness range, hole and cut schedule, weekly size mix and target completed-part output.
Send your drawing for a matched proposal
We will confirm the suitable model, process route, line modules and the values that can be guaranteed for your material.
- Dimensioned profile drawing
- Material grade and thickness
- Hole pattern and finished lengths
- Target output per shift
- Power supply and destination country